How To Repair Garage Door Cable?

The biggest moving feature of any house is the garage door. A typical garage door can occupy more than 40 percent of your house area. Honestly, before reading this, did you even pay heed to the importance of your garage door?

So, imagine the hassle if the garage door malfunctions or needs repairing. To help you, we have compiled this short troubleshooting guide. Keep reading to find out how you can fix your damaged garage door. 

Repair Your Garage Door Cable

If a garage door is damaged or broken, then the only way to tackle the mess is to replace the door immediately. 

Simply release the connecting cable holding the garage door when it opens. Then switch off the opener of the garage door and make sure the whole door is open. Now connect the C-shaped clamps beneath the door towards both sides. This will make sure that the door stays open. 

When these steps are done, the springs must be unhinged from the place. Then carefully remove the defective cable. Attach a new cable wire and tie back the springs to secure the garage door.

Get rid of the C-shaped clamps and switch on the door opener. Conduct a small test whether your door is working or not. 

It is essential that you open the door completely to complete all the repairs. Make sure the tension in the springs is removed before you do the repair job. Otherwise, if the door falls on you it can result in a huge accident. Ensure your complete safety before you do these repairs. 

The DIY Repair Job

If you think that garage door cable repair is a difficult job that requires the assistance of a professional, then let us tell you that this is a task that is usually done by people themselves. 

All you need is to believe in yourself that you can actually exhibit the job. Simply follow the steps we have described above and you will not face any trouble.

However, certain homeowners may feel skeptical about a DIY garage door cable repair especially if it is their first attempt. Many people remain worried about their safety because the cable is installed for safety purposes in the first place. 

If you are in the same boat then you can seek the assistance of a professional who can do these repairs for you. This way you can stay rest assured that someone credible is handling your garage door repairs. 

In The End

After reading the above article, you must feel somewhat confident in your abilities to repair a garage door by yourself. However, even if there is a shred of doubt in your mind that you will not be able to do it properly, then contact a licensed garage door company to help you.

Always remember that the cables of your garage door are extremely important. Hence, it is equally important to timely maintain them.

FAQs

What are the signs that a garage door cable needs to be repaired?

Signs that a garage door cable needs to be repaired include a cable that is frayed, worn, or broken or a door that is not functioning properly.

What are the steps to repair a garage door cable?

  • The steps to repair a garage door cable are:
  • Disconnect the opener by pulling the emergency release cord
  • Locate the cable drum on the opener
  • Carefully remove the cable from the drum
  • Inspect the cable for any damage and replace it if necessary
  • Reinstall the cable on the drum
  • Reconnect the opener

How long does it take to repair a garage door cable?

It typically takes about 1-2 hours to repair a garage door cable depending on the complexity of the garage door and the technician’s experience.

How much does it cost to repair a garage door cable?

The cost to repair a garage door cable can vary depending on the type of garage door and the extent of the damage. The price can range from $50 to $200.

Should I repair a garage door cable myself or call a professional?

Because garage door cables are under high tension, it’s recommended to call a professional technician to repair them. Improperly repaired cables can cause damage or injury.

RELATED POSTS

garage door repair company
garage door cable repair